ZyXEL Communications IES-708-22A - Manual (Page 388)

Chapter 57 Product Specifications
IES-708-22A User’s Guide
388
Telephone Wire Gauge 26 AWG or larger
Temperature Operating: 0 ~ 50 ºC (32 ~ 122 ºF)
Storage: -20 ~ 70 ºC (-4 ~ 158 ºF)
Humidity Operating: 10 ~ 90% (non-condensing)
Storage: 10 ~ 95% (non-condensing)
Table 98 Firmware Specifications
SPECIFICATION DESCRIPTION
Default IP Address 192.168.1.1
Default Subnet Mask 255.255.255.0 (24 bits)
Default Password 1234
ATM layer Support Protocols: Multiple protocols over AAL5 (RFC 2684).
- Support LLC and VC multiplexing modes.
Multiple PVC support
- 8 PVCs per port and each PVC is configurable
- PVC to VLAN mapping
- 802.1p default priority
- PVC with traffic class (UBR, CBR, nrt-VBR, rt-VBR)
- Full range VPI and VCI
OAM F5 end-to-end loopback (ATM mode)
Ethernet Standalone and daisy chain mode
RSTP support
Bridging IEEE 802.1Q VLAN aware bridging
- Accept tagged and untagged packets from SHDSL ports
- Accept tagged and untagged packets from Ethernet interface
- GVRP
Port isolation
256 static VLAN entries (full-range VLAN ID 1~4094)
4 K MAC address entries
Packet filtering MAC count limiting
MAC filtering: only selected MACs can pass through or are denied
PPPoE filtering (pass-through/filter out)
IGMP filtering (pass-through/filter out)
DHCP filtering (pass-through/filter out)
NetBIOS filtering (pass-through/filter out)
IEEE 802.1X (EAPOL) filtering (pass-through/filter out)
IP filtering (pass-through/filter out)
ARP filtering (pass-through/filter out)
QoS Four output priority queues with packet priority scheduling
Packet prioritizing per 802.1p
- Static configuration – default priority setting
- 8 priority queues per PVC (up to 4 PVCs)
Broadband access
support
DHCP snooping
DHCP relay agent option 82
IEEE 802.1x port-based authentication with remote radius server
Table 97 Hardware Specifications (continued)
SPECIFICATION DESCRIPTION