ZyXEL Communications IES-708-22A - Manual (Page 273)

Chapter 44 Alarm Commands
IES-708-22A User’s Guide
273
44.8 Alarm History Show Command
Syntax:
ras> alarm history show [<severity>|all] [<alarm>|all] [<condition>|all]
[<sdate>|all] [<edate>|all] [for|rev] [detail]]
where
This command displays historic alarms by severity, alarm category, alarm condition and/or
dates.
The following example displays the historic major and critical level alarms.
44.9 Alarm History Clear Command
Syntax:
ras> alarm history clear <alarm>|all <condition>|all
ras> alarm history clear <severity>
syslog This displays “V” if the system is to send this alarm to a syslog server. It displays
“-“ if the system does not send this alarm to a syslog server.
severity This is the alarm severity level (critical, major, minor or info).
clearable This displays “V” if the alarm clear command removes the alarm from the
system. It displays “-“if the alarm clear command does not remove the alarm
from the system.
Table 91 Log Format (continued)
LABEL DESCRIPTION
<severity> = Alarm severity. info|minor|major|critical
<alarm> = Alarm category. sys|eqpt|enet|dsl|voip
<condition> = Text description for the condition.
<sdate> = Start date (yyyy/mm/dd)
<edate> = End date (yyyy/mm/dd)
[for|rev] = Display order. for: forward; rev: reverse.
[detail] = Display in-depth alarm information.
ras> alarm history show major
no alarm condition severity timestamp source
------ ------ -------------------- -------- -------------- -------
1 enet +down major 01/01 00:00:08 enet 1
2 enet -down major 01/01 00:00:11 enet 1