ZyXEL Communications IES-708-22A User Manual
Page 254
Chapter 42 Commands
IES-708-22A User’s Guide
254
pmm set
<portlist>
<normal|forced>
H/H
pbo show
<portlist>
L/L
pbo set
<portlist>
<normal_epl|forced_epl|f
orced_no_epl> <value>
H/H
alarm
clear
Clear current alarm
M/L
cutoff
Alarm cutoff
M/~
xedit
<alarm>|all
<cond>|<condcode>
<severity> <fac>
<target>[,<target>]
[clearable]
Edit system alarm table
M/L
history clear
<alarm>|all
<condition>|all
Clear history alarm
M/~
history clear
<severity>
Clear history alarm
M/~
history show
[<severity>|all]
[<alarm>|all]
[<condition>|all]
[<sdate>|all]
[<edate>|all] [for|rev]
[detail]
Display history alarm
L/~
show
[<severity>|all]
[<alarm>|all]
[<condition>|all]
[<sdate>|all]
[<edate>|all] [for|rev]
[detail]
Display current alarm
L/L
port show
Display xDSL port threshold of
severity which will issue an alarm
L/L
port set
<all|<portlist>>
<severity>
Set xDSL port threshold of
severity which will issue an alarm
M/L
tablelist
[<alarm>|all]
[<severity>|all] [<fac>|all]
[<target>[,<target>]]
[<condition>|all]
Display system alarm table
L/L
switch
igmpsnoop show
Displays the IGMP snooping
setting.
M/L
igmpsnoop enable
<proxy|snooping>
(STUC mode only) Sets IGMP
snooping mode.
H/H
igmpsnoop enable
(STUR mode only) Enables IGMP
snooping.
H/H
igmpsnoop disable
Turns off IGMP proxy/snooping.
H/H
igmpsnoop bandwidth
default
<bandwidth>
(STUC mode only) Set default
bandwidth for multicast IP
channels
M/H
Table 89 Commands (continued)
CLASS
COMMAND
PARAMETERS
DESCRIPTION
P