ZyXEL Communications IES-708-22A - Manual (Page 356)

Chapter 54 Virtual Channel Management
IES-708-22A User’s Guide
356
54.5.4 RPVC Gateway Delete Command
Syntax:
ras> shdsl rpvc gateway delete <gateway ip>
where
This command removes a gateway IP address that the device was set to use for 2684 routed
mode traffic.
The following example has the device remove a 2684 routed mode traffic gateway entry for IP
address 192.168.10.102.
54.5.5 RPVC Set Command
Syntax:
ras> shdsl rpvc set <portlist> <vpi> <vci> <DS vcprofile[,US vcprofile]>
<ip>/<netmask> <gateway ip>
where
<gateway ip> = The IP address of the gateway to which you no longer want the
device to send the traffic that the system receives from this
PVC. Enter the IP address in dotted decimal notation.
ras> shdsl rpvc gateway delete 192.168.10.102
<portlist> = The port(s) of the RPVC.
You can specify a single DSL port <1>, all DSL ports <*> or a
list of DSL ports <1,3,5>. You can also include a range of ports
<1,5,6~8>.
<vpi> = The VPI of the RPVC.
<vci> = The VCI of the RPVC.
DS vcprofile = Assign a VC profile to use for this channel’s downstream traffic
shaping.
[,US
vcprofile]> = Assign a VC profile to use for policing this channel’s upstream
traffic. The IES-708-22A does not perform upstream traffic
policing if you do not specify an upstream VC profile.
<ip> = The subscriber’s CPE WAN IP address in dotted decimal
notation.