Initial configuration, 1 initial configuration overview, 2 initial configuration – ZyXEL Communications IES-708-22A User Manual
Page 65: Chapter 5 initial configuration, Figure 16 ip setup, Initial configuration (65)
IES-708-22A User’s Guide
65
C
H A P T E R
5
Initial Configuration
This chapter describes initial configuration for the IES-708-22A. See
for various default settings of the IES-708-22A.
5.1 Initial Configuration Overview
This chapter shows what you first need to do to provide service to DSL subscribers.
5.2 Initial Configuration
This chapter uses the web configurator for initial configuration. See the CLI chapters for
information on the commands. Use Internet Explorer 6 and later versions with JavaScript
enabled.
1 Log in to the web configurator. See
for instructions.
2 In the navigation panel, click Basic Setting > IP Setup. The IP Setup screen appears.
Figure 16 IP Setup
3 Use this screen to change the IP address, subnet mask, and default gateway IP address
for your network. Apply the settings.