1 ethernet port statistics screen, Ethernet port statistics screen – ZyXEL Communications IES-708-22A User Manual

Page 72

Advertising
background image

Chapter 6 Home and Port Statistics Screens

IES-708-22A User’s Guide

72

6.1.1 Ethernet Port Statistics Screen

Use this screen to display statistics about an Ethernet port. To open this screen, click an
Ethernet port’s number in the Home screen.

Media

This field displays the type of media that this Ethernet port is using for a

connection. “-“ displays when the port is disabled or not connected.

Duplex

This field displays whether the port is using half or full-duplex communication. “-

“ displays when the port is disabled or not connected.

Up Time

This field shows the total amount of time in hours, minutes and seconds the

port’s connection has been up. “--:--:--“ displays when the port is disabled or not

connected.

The following fields are related to the xDSL ports.

xDSL

This identifies the xDSL port. Click a port number to display that port’s statistics

screen. The

DSL Port Statistics Screen

appears. See

Section 6.1.2 on page 75

.

Status

This field shows whether the port is connected (Up) or not (Down).

Actual Rate

This field shows the interface's current bandwidth in kilobits per second. For

interfaces that do not vary in bandwidth or for those where no accurate

estimation can be made, this object should contain the nominal bandwidth.

Up Time

This field shows the total amount of time in hours, minutes and seconds the

port’s connection has been up. “-“ displays when the port is not connected.

The following fields and buttons apply to the whole screen.

Poll Interval(s)
Set Interval

The text box displays how often (in seconds) this screen refreshes. You may

change the refresh interval by typing a new number in the text box and then

clicking Set Interval.

Stop

Click Stop to halt system statistic polling.

Port
Clear Counter

Select a port from the Port drop-down list box and then click Clear Counter to

erase the recorded statistical information for that port.

Reset

Click this to set the Poll Interval(s) and Port fields to their default values and to

refresh the screen.

Table 5 Home (continued)

LABEL

DESCRIPTION

Advertising