ZyXEL Communications IES-708-22A - Manual (Page 142)

Chapter 17 VLAN
IES-708-22A User’s Guide
142
17.4 Static VLAN Setting Screen
You can assign a port to be a member of a VLAN group or prohibit a port from joining a
VLAN group in this screen. This is an IEEE 802.1Q VLAN.
To open this screen, click Advanced Application > VLAN > Static VLAN Setting.
Figure 63 Advanced Application > VLAN > Static VLAN Setting
The following table describes the labels in this screen.
Stop Click Stop to halt polling statistics.
Previous Page
Next Page Click one of these buttons to show the preceding/following screen if the
information cannot be displayed in one screen.
Table 33 Advanced Application > VLAN (continued)
LABEL DESCRIPTION
Table 34 Advanced Application > VLAN > Static VLAN Setting
LABEL DESCRIPTION
VLAN Status Click VLAN Status to see which of the IES-708-22A’s ports are members of
which VLANs (see Section 17.3 on page 140 )
VLAN Port Setting Click VLAN Port Setting to specify Port VLAN IDs (PVIDs). See Section 17.5
on page 143 .
VID This field displays the ID number of the VLAN group. Click the number to edit
the VLAN settings.
Active This field indicates whether the VLAN settings are enabled (Yes) or disabled
(No).