Brocade Multi-Service IronWare Routing Configuration Guide (Supporting R05.6.00) - Manual (Page 142)

114 Multi-Service IronWare Routing Configuration Guide
53-1003033-02
Filtering
Brocade(config)# ip route 192.168.0.1/32 null0
Brocade(config)# router bgp
Brocade(config-bgp-router)# local-as 100
Brocade(config-bgp-router)# neighbor <router1_int_ip address> remote-as 100
Brocade(config-bgp-router)# neighbor <router3_int_ip address> remote-as 100
Brocade(config-bgp-router)# neighbor <router4_int_ip address> remote-as 100
Brocade(config-bgp-router)# neighbor <router5_int_ip address> remote-as 100
Brocade(config-bgp-router)# neighbor <router6_int_ip address> remote-as 100
Brocade(config-bgp-router)# neighbor <router7_int_ip address> remote-as 100
Show commands
After configuring the null0 application, you can display the output using show commands.
Device 6
Show ip route static output for device 6.
Device 1 and 2
Show ip route static output for device 1 and device 2.
Brocade# show ip route static
Type Codes - B:BGP D:Connected S:Static R:RIP O:OSPF; Cost - Dist/Metric
Destination Gateway Port Cost Type
1 10.0.0.40/29 DIRECT eth 3/7 1/1 S
2 10.0.0.192/27 DIRECT eth 3/7 1/1 S
3 10.0.14.0/23 DIRECT eth 3/7 1/1 S
Brocade#
Brocade# show ip route static
Type Codes - B:BGP D:Connected S:Static R:RIP O:OSPF; Cost - Dist/Metric
Destination Gateway Port Cost Type
1 192.168.0.1/32 DIRECT drop 1/1 S
Brocade#