Brocade Multi-Service IronWare Routing Configuration Guide (Supporting R05.6.00) - Manual (Page 615)

Multi-Service IronWare Routing Configuration Guide 587
53-1003033-02
Displaying BGP4+ information
Displaying BGP4+VRF6 nexthop information
To view BGP4+ VRF6 nexthop information for a specified VRF6, enter the following command.
Syntax: show ipv6 bgp vrf vrf-name nexthop
The vrf-name parameter specifies the VRF6 name whose nexthop information needs to be
displayed.
Table 127 provides information about the command’s output.
RcvNext The next sequence number expected from the neighbor.
SendWnd The size of the send window.
TotalRcv The number of sequence numbers received from the neighbor.
DupliRcv The number of duplicate sequence numbers received from the
neighbor.
RcvWnd The size of the receive window.
SendQue The number of sequence numbers in the send queue.
RcvQue The number of sequence numbers in the receive queue.
CngstWnd The number of times the window has changed.
TABLE 127 BGP4+ VRF6 nexthop information
This field... Displays...
safi Subsequent address family ID.
Type Codes Type of route.
OSPF Codes Type of OSPF route
Next Hop The next-hop IP address.
Type Type of route.
Cost Metric of route.
ResolveSchema Method to resolve nexthop
Router IP The router IP address.
Port The port number of the interface.
TABLE 126 BGP4+ VRF6 neighbor information (Continued)
This field... Displays...
Brocade#show ipv6 bgp vrf abc nexthop
safi : BGP IPV6 UNICAST SAFI
Type Codes - B:BGP D:Connected I:ISIS L:Local O:OSPF R:RIP S:Static
OSPF Codes - i:Internal 1:External Type 1 2:External Type 2
Next Hop Type Cost ResolveSchema Router IP Port
3:3:3::3 Oi 2 IPv4/6 fe80::200:ff:fe02:0 eth 1/2