Brocade Multi-Service IronWare Routing Configuration Guide (Supporting R05.6.00) - Manual (Page 244)

216 Multi-Service IronWare Routing Configuration Guide
53-1003033-02
Displaying OSPF information
TABLE 22 Output parameters of the show ip ospf config command
Field Description
Router OSPF Shows whether or not the router OSPF is enabled.
Nonstop Routing Shows whether or not the non-stop routing is enabled.
Graceful Restart Shows whether or not the graceful restart is enabled.
Graceful Restart Helper Shows whether or not the OSPF graceful restart helper mode is enabled.
Graceful Restart Time Shows the maximum restart wait time advertised to neighbors.
Graceful Restart Notify
Time Shows the graceful restart notification time.
Redistribution Shows whether or not the redistribution is enabled.
Default OSPF Metric Shows the default OSPF metric value.
OSPF Auto-cost
Reference Bandwidth Shows whether or not the auto-cost reference bandwidth option is enabled.
Default Passive Interface Shows whether or not the default passive interface state is enabled.
OSPF Redistribution
Metric Shows the OSPF redistribution metric type, which can be one of the following:
•
Type1
•
Type2
OSPF External LSA Limit Shows the external LSA limit value.
OSPF Database Overflow
Interval Shows the database overflow interval value.
RFC 1583 Compatibility Shows whether or not the RFC 1583 compatibility is enabled.
Router id Shows the ID of the OSPF router.
OSPF traps Shows whether or not the following OSPF traps generation is enabled.
•
Interface State Change Trap
•
Virtual Interface State Change Trap
•
Neighbor State Change Trap
•
Virtual Neighbor State Change Trap
•
Interface Configuration Error Trap
•
Virtual Interface Configuration Error Trap
•
Interface Authentication Failure Trap
•
Virtual Interface Authentication Failure Trap
•
Interface Receive Bad Packet Trap
•
Virtual Interface Receive Bad Packet Trap
•
Interface Retransmit Packet Trap
•
Virtual Interface Retransmit Packet Trap
•
Originate LSA Trap
•
Originate MaxAge LSA Trap
•
Link State Database Overflow Trap
•
Link State Database Approaching Overflow Trap
Area-ID Shows the area ID of the interface.
Area-Type Shows the area type, which can be one of the following:
•
nssa
•
normal
•
stub
Cost Shows the cost of the area.