Clear ip bgp vpnv6 neighbor – Brocade Multi-Service IronWare Routing Configuration Guide (Supporting R05.6.00) User Manual
Page 626
598
Multi-Service IronWare Routing Configuration Guide
53-1003033-02
clear ip bgp vpnv6 neighbor
clear ip bgp vpnv6 neighbor
Clears the information specific to BGP VPNv6 neighbors
Syntax
clear ip bgp vpnv6 neighbor { as-number { soft | soft-outbound } | ip-address { soft |
soft-outbound } | all { soft | soft-outbound }}
Command
Default
None
Parameters
as-number
neighbors with the AS number
ip-address
Neighbor IP address
all
Clears all BGP neighbors
soft
Soft reconfiguration
soft-outbound
Soft reconfiguration outbound update, and send only updated routes
Command
Modes
Global configuration mode
Usage
Guidelines
Use the clear ip bgp vpnv6 neighbor command to clear information specific to BGP VPNv6
neighbors.
NOTE
The clear ip bgp vpnv6 neighbor command does not support damped-path and flap-statistics
options for VPNv4 and VPNv6 address families.
Examples
The following example explains how to clear BGP VPNV6 neighbor information.
Brocade(config-bgp)#clear ip bgp vpnv6
Related
Commands
address-family vpnv6
neighbor ipv4-address remote-as as-number activate
neighbor capability orf
Release
Command History
Multi-Service IronWare R05.5.00 This command was introduced.