Brocade Multi-Service IronWare Routing Configuration Guide (Supporting R05.6.00) - Manual (Page 429)

Multi-Service IronWare Routing Configuration Guide 401
53-1003033-02
Displaying the management VRF information
Total number of IPv4 unicast route for all non-default VRF is 12
Total number of IPv6 unicast route for all non-default VRF is 2
Brocade#show vrf a
VRF a, default RD 1:1, Table ID 1 IFL ID 131071
Label: (Not Allocated), Label-Switched Mode: OFF
Configured as management-vrf
IP Router-Id: 10.2.2.2
No interfaces
No Export VPN route-target communities
No Import VPN route-target communities
No import route-map
No export route-map
Address Family IPv4
Max Routes: 5120
Number of Unicast Routes: 12
No Export VPN route-target communities
No Import VPN route-target communities
Address Family IPv6
Max Routes: 128
Number of Unicast Routes: 2
No Export VPN route-target communities
No Import VPN route-target communities
Syntax: show vrf vrf-name
The vrf-name parameter specifies the VRF for which you want to display IP information.
Table 68 displays a description of the output from the show vrf command.
TABLE 68 Output from the show vrf command
This field... Displays...
VRF vrf-name The name of the VRF.
default RD The default route distinguisher for the VRF.
Table ID The table ID for the VRF.
Routes The total number of IPv4 and IPv6 Unicast routes configured on this
VRF.
IFL ID The Internal Forwarding Lookup Identifier (IFL-ID) for ports in the VRF
instance.
Label The unique VRF label that has been assigned to the specified
VRF.
Label-Switched Mode Indicates whether Label-Switched Mode is ON or OFF.
Configured as
management-vrf Indicates that the specified VRF is configured as a management VRF.
IP Router-Id The 32-bit number that uniquely identifies the router.
Number of Unicast
Routes The number of Unicast routes configured on this VRF.