Brocade Multi-Service IronWare Routing Configuration Guide (Supporting R05.6.00) - Manual (Page 506)

478 Multi-Service IronWare Routing Configuration Guide
53-1003033-02
Displaying global IPv6 information
bad vers The number of IPv6 packets dropped by the device because the version number
is not 6.
bad scope The number of IPv6 packets dropped by the device because of a bad address
scope.
bad options The number of IPv6 packets dropped by the device because of bad options.
too many hdr The number of IPv6 packets dropped by the device because the packets had
too many headers.
no route The number of IPv6 packets dropped by the device because there was no route.
can not forward The number of IPv6 packets the device could not forward to another device.
redirect sent This information is used by Brocade Technical Support.
source routed The number of IPv6 source-routed packets dropped.
frag recv The number of fragments received by the device.
frag dropped The number of fragments dropped by the device.
frag timeout The number of fragment timeouts that occurred.
frag overflow The number of fragment overflows that occurred.
reassembled The number of fragmented IPv6 packets that the device reassembled.
fragmented The number of IPv6 packets fragmented by the device to accommodate the
MTU of this device or of another device.
ofragments The number of output fragments generated by the device.
can not frag The number of IPv6 packets the device could not fragment.
too short The number of IPv6 packets dropped because they are too short.
too small The number of IPv6 packets dropped because they do not have enough data.
not member The number of IPv6 packets dropped because the recipient is not a member of
a multicast group.
no buffer The number of IPv6 packets dropped because there is no buffer available.
forward cache miss The number of IPv6 packets received for which there is no corresponding cache
entry.
ICMP6 statistics
Some ICMP statistics apply to both Received and Sent, some apply to Received only, some apply to Sent only, and
some apply to Sent Errors only.
Applies to Received and Sent
dest unreach The number of Destination Unreachable messages sent or received by the
device.
pkt too big The number of Packet Too Big messages sent or received by the device.
time exceeded The number of Time Exceeded messages sent or received by the device.
param prob The number of Parameter Problem messages sent or received by the device.
echo req The number of Echo Request messages sent or received by the device.
echo reply The number of Echo Reply messages sent or received by the device.
TABLE 90 IPv6 traffic statistics fields (Continued)
This field... Displays...