Displaying bgp4+vpnv6 routing table information – Brocade Multi-Service IronWare Routing Configuration Guide (Supporting R05.6.00) User Manual
Page 605
Multi-Service IronWare Routing Configuration Guide
577
53-1003033-02
Displaying BGP4+ information
Displaying BGP4+VPNv6 routing table information
To view BGP4+ VPNv6 routing table information for IPv4 neighbors, enter the following command.
Syntax: show ip bgp vpnv6 routes
Table 123
provides information about the command output.
TotalRcv
The number of sequence numbers received from the neighbor.
DupliRcv
The number of duplicate sequence numbers received from the
neighbor.
RcvWnd
The size of the receive window.
SendQue
The number of sequence numbers in the send queue.
RcvQue
The number of sequence numbers in the receive queue.
CngstWnd
The number of times the window has changed.
TABLE 122
BGP4+ VPNv6 neighbor information (Continued)
This field...
Displays...
Brocade#(config-mpls-if-e1000-2/5)#show ip bgp vpnv6 routes
Total number of BGP Routes: 4
Status A:AGGREGATE B:BEST b:NOT-INSTALLED-BEST C:CONFED_EBGP D:DAMPED
E:EBGP H:HISTORY I:IBGP L:LOCAL M:MULTIPATH
m:NOT-INSTALLED-MULTIPATH
S:SUPPRESSED F:FILTERED s:STALE
Prefix Next Hop MED LocPrf Weight Status
Route Distinguisher: 1:1
1 10::41/128 ::FFFF:40:0:0:2 3 100 0 I
AS_PATH:
2 30::/64 ::FFFF:40:0:0:2 3 100 0 I
AS_PATH:
3 40::/64 ::FFFF:40:0:0:2 3 100 0 I
AS_PATH:
4 100::/64 ::FFFF:40:0:0:2 3 100 0 I
AS_PATH: