As-path prepend and extended community information, Running configuration, Access lists that contain as4s – Brocade Multi-Service IronWare Routing Configuration Guide (Supporting R05.6.00) User Manual
Page 178
150
Multi-Service IronWare Routing Configuration Guide
53-1003033-02
Displaying BGP4 information
AS-path prepend and extended community information
The AS-path prepend and extended community information is shown in this example of the show
route-map command.
Syntax: show route-map [name]
The optional name parameter lets you name a specific route.
Running configuration
AS4s appear in the display of a running configuration, as shown.
Access lists that contain AS4s
AS4s that exist in access lists are displayed by the command, as shown.
Brocade# show route-map
route-map test permit 1
match ip address 1
set as-path prepend 75000
set extcommunity RT 100000:123
set extcommunity SOO 150000:456
route-map test permit 2
match ip address 2
set as-path prepend 80000
Brocade# show ip bgp config
Current BGP configuration:
router bgp
local-as 7701000
confederation identifier 120000
confederation peers 80000
neighbor 192.168.1.2 remote-as 80000
Brocade# show ip as-path-access-lists
ip as-path access list abc: 1 entries
seq 10 permit _75000_
ip as-path access list def: 1 entries
seq 5 permit _80000_