Brocade Multi-Service IronWare Routing Configuration Guide (Supporting R05.6.00) - Manual (Page 650)

622 Multi-Service IronWare Routing Configuration Guide
53-1003033-02
show ipv6 bgp vrf nexthop
show ipv6 bgp vrf nexthop
Displays BGP4+ nexthop information for a specified VRF6
Syntax show ipv6 bgp vrf vrf-name nexthop
Parameters vrf-name Specifies the VRF6 name whose nexthop information needs to be displayed.
Command
Modes
Privileged EXEC mode
Usage
Guidelines
The show ipv6 bgp vrf nexthop command displays details about the BGP4+ VRF6’s nexthop.
Command
Output
The show ipv6 bgp vrf nexthop command displays the following information:
Examples The following example displays BGP4+ nexthop information:
Brocade#show ipv6 bgp vrf abc nexthop
safi : BGP IPV6 UNICAST SAFI
Type Codes - B:BGP D:Connected I:ISIS L:Local O:OSPF R:RIP S:Static
OSPF Codes - i:Internal 1:External Type 1 2:External Type 2
Next Hop Type Cost ResolveSchema Router IP Port
3:3:3::3 Oi 2 IPv4/6 fe80::200:ff:fe02:0 eth 1/2
History
Related
Commands
show ipv6 bgp vrf neighbors
show ipv6 bgp vrf peer-group
show ipv6 bgp vrf routes
show ipv6 bgp vrf summary
Output field Description
safi Subsequent address family ID.
Type Codes Type of route.
OSPF Codes Type of OSPF route
Next Hop The next-hop IP address.
Type Type of route.
Cost Metric of route.
ResolveSchema Method to resolve nexthop
Router IP The router IP address.
Port The port number of the interface.
Release Command History
Multi-Service IronWare R05.5.00 This command was introduced.