Brocade Multi-Service IronWare Routing Configuration Guide (Supporting R05.6.00) - Manual (Page 776)

748 Multi-Service IronWare Routing Configuration Guide
53-1003033-02
IPv6 IS-IS Multi-Topology
Brocade(config-isis-router)# net 00.0000.001b.ed04.4000.00
Brocade(config-isis-router)# address-family ipv4 unicast
Brocade(config-isis-router-ipv4u)# metric-style wide
Brocade(config-isis-router-ipv4u)# exit-address-family
Brocade(config-isis-router)# address-family ipv6 unicast
Brocade(config-isis-router-ipv6u)# multi-topology
Brocade(config-isis-router- ipv6u)# exit-address-family
Configuration commands to enable IPv6 IS-IS MT on router C2
The following commands enable IPv6 IS-IS MT on router C2.
Brocade(config)# router isis
Brocade(config-isis-router)# net 00.0000.001b.ed04.0000.00
Brocade(config-isis-router)# address-family ipv4 unicast
Brocade(config-isis-router-ipv4u)# metric-style wide
Brocade(config-isis-router-ipv4u)# exit-address-family
Brocade(config-isis-router)# address-family ipv6 unicast
Brocade(config-isis-router-ipv6u)# multi-topology
Brocade(config-isis-router-ipv6u)# exit-address-family
To display current running configuration for the router D2, enter the following command.
Brocade# show running-config
router isis
net 00.0000.001b.ed04.4400.00
address-family ipv4 unicast
metric-style wide
exit-address-family
address-family ipv6 unicast
multi-topology
exit-address-family
End