Brocade Multi-Service IronWare Routing Configuration Guide (Supporting R05.6.00) - Manual (Page 182)

154 Multi-Service IronWare Routing Configuration Guide
53-1003033-02
Displaying BGP4 information
Syntax: show route-map map-name
Brocade# show route-map test
route-map test permit 1
set weight 10
continue 5
route-map test permit 2
set metric 20
continue 3
route-map test permit 3
set community 10:20
continue 4
route-map test permit 4
set community 30:40
continue 5
route-map test permit 5
set as-path prepend 300
continue 6
route-map test permit 6
set as-path prepend 100
continue 7
route-map test permit 7
set community none
set local-preference 70
continue 8
Brocade(config-routemap test)#route-map test deny 8
Brocade(config-routemap test)#set metric 40
Brocade(config-routemap test)#continue 9
Brocade(config-routemap test)#show ip bgp route
BGP Routing Table is empty