Brocade Multi-Service IronWare Routing Configuration Guide (Supporting R05.6.00) - Manual (Page 645)

Multi-Service IronWare Routing Configuration Guide 617
53-1003033-02
show ipv6 bgp vrf neighbors
Time The amount of time this session has been in its current state.
KeepAliveTime The KeeAliveTime, which specifies how often this device sends keep alive messages
to the neighbor.
HoldTime The hold time, which specifies how many seconds the device waits for a KEEPALIVE or
UPDATE message from a BGP4 neighbor before deciding that the neighbor is dead.
Messages Sent The number of messages this device has sent to the neighbor. The display shows
statistics for the following message types:
•
Open
•
Update
•
KeepAlive
•
Notification
•
Refresh-Req
Messages Received The number of messages this device has received from the neighbor. The message
types are the same as for the Message Sent field.
Last Update Time Lists the last time updates were sent and received for the following:
•
NLRIs
•
Withdraws
Last Connection Reset
Reason The reason the previous session with this neighbor ended. The reason can be one of
the following:
•
Reasons described in the BGP specifications:
•
Message Header Error
•
Connection Not Synchronized
•
Bad Message Length
•
Bad Message Type
•
OPEN Message Error
•
Unsupported Version Number
•
Bad Peer AS Number
•
Bad BGP Identifier
•
Unsupported Optional Parameter
•
Authentication Failure
•
Unacceptable Hold Time
•
Unsupported Capability
•
UPDATE Message Error
•
Malformed Attribute List
•
Unrecognized Well-known Attribute
•
Missing Well-known Attribute
•
Attribute Flags Error
•
Attribute Length Error
•
Invalid ORIGIN Attribute
•
Invalid NEXT_HOP Attribute
•
Optional Attribute Error
•
Invalid Network Field
•
Malformed AS_PATH
•
Hold Timer Expired
•
Finite State Machine Error
•
Rcv Notification
Output field Description