Brocade Multi-Service IronWare Routing Configuration Guide (Supporting R05.6.00) - Manual (Page 624)

596 Multi-Service IronWare Routing Configuration Guide
53-1003033-02
address-family ipv6 unicast vrf
address-family ipv6 unicast vrf
Configures the BGP commands for a specific VRF neighbor.
Syntax address-family ipv6 unicast vrf vrf-name
Command
Default
None
Parameters vrf-name The vrf option allows you to configure a unicast instance for the VRF specified
by the vrf-name variable.
Command
Modes
BGP interface configuration mode
Usage
Guidelines
The address-family ipv6 unicast vrf command is used to configure the BGP commands for a
specific VRF neighbor.
Examples The following example explains how to configure address-family for vpnv6 unicast.
Brocade(config-bgp)#address-family vpnv6 unicast
Brocade(config-bgp-vpnv6u)#?
address-family Enter Address Family command mode
bfd Set BFD global parameters for BGP4
bfd-enable Enable BFD for BGP4
clear Clear table/statistics/keys
cls Clear screen
end End Configuration level and go to Privileged
level
exit Exit current level
exit-address-family Exit Address Family command mode
neighbor Specify a neighbor router
no Undo/disable commands
quit Exit to User level
rr-group Partition the network by forming RR groups
show Display system information
write Write running configuration to flash or terminal
Related
Commands
clear ipv6 bgp vrf
Release Command History
Multi-Service IronWare R05.5.00 This command was introduced.