Delete a traffic contract – ADC Release 3.1 User Manual

Page 109

Advertising
background image

1152700

Issue 1

February 2001

Section 2 Operations and Maintenance

Page 2-89

© 2000, ADC Telecommunications, Inc.

DLP-709

Page 2 of 4

Note: Three traffic descriptors must be provided for the connections to set the cell
transfer characteristics: Peak Cell Rate (PCR), Sustained Cell Rate (SCR), and
Maximum Burst Size (MBS). The PCR is the highest available cell transfer rate for VBR
connections, or the continuous cell transfer rate for CBR connections. SCR defines the
sustained cell transfer rate for VBR connections that may fluctuate up to the PCR for a
burst length of MBS cells. MBS is what defines the maximum number of cells in a
single burst that can be transmitted above the SCR and up to the PCR in a VBR
connection. SCR and MBS are not applicable to CBR connections. Valid values for MBS
are 32, 50, 100, 150, and 210, and relate to the incoming packet size from the customer
premises equipment.

5. After selecting the parameters for the new traffic contract, select Apply using the left mouse

button.

6. A completion window appears stating the Traffic contract was created successfully. The

contract name will be displayed in this window. Refer to

Figure 709-3

. Select OK.

7. If the contract name is already in use, the message window shown in

Figure 709-4

will

appear.

Delete a Traffic Contract

8. To delete an existing traffic contract, access the Traffic Contract window per step 1. Select

a contract by single clicking the left mouse button with the cursor on the desired contract.

9. Select Delete at the bottom of the window.

10. A confirmation message window appears as shown in

Figure 709-5

. Select OK.

Note: Traffic contracts cannot be removed if they are in use.

Stop! You have completed this procedure.

Cellworx Vision Subnetwork Management System

File Configuration Fault Performance

Software

NMIC Platform

Topology

Time and Date

Create...

View Fiber Bandwidth Usage ...

View Ring Resource Usage ...

Configure Service Provider Profile ...

Configure Traffic Contract ...

View ...

Connection

10980-D

Figure 709-1. Cellworx Vision Configure a Traffic Contract Pull Down Menu

Advertising