ADC Release 3.1 - Manual (Page 392)

1152700 • Issue 1 • February 2001 • Operation and Maintenance
Page 2-372
© 2000, ADC Telecommunications, Inc.
DLP-786
Page 9 of 10
Cellworx Vision: Connection Configuration
<< Previous
X
Connection Name:
Connection Type: FR - ATM VC
GNE- 21 <--> RNE- 22
Network Element: GNE-21
FRF.5: DS0-E0 FRS: Slot 14: Port 03: Channels 01-24
Locked
Unlocked
Administrative State:
Maximum Frame Size: bytes
DLCI/ NE / Rate (Kbps):
16 / RNE 22 / 1
17
18
19
20
21
22
23
Page
1
4096
PVC Endpoint Parameters:
Ingress NDC
Egress NDC
ATM OAM
SSCS LMI
DE Bit Tagging
Remote Connection Identifier (DLCI) :
Service Provider Profile
FR Interface Identifier:
Study Indication
Remote Interface Type:
0
UNI BICI FR UNI
Network Element: RNE-22
DS3: Slot8_Port2 DS3 SM
VPI / NE / Rate (Kbps):
16 / GNE 21 / 1
17
18
Page
1
Next >> Close
ASSIGN A CONNECTION NAME.
DISPLAYS CONNECTION TYPE
SPECIFIED IN PREVIOUS
WINDOW.
SELECT AN OPEN DLCI
NUMBER. NUMBERS WITH
NE AND RATE INDICATED
ARE ALREADY IN USE.
SELECT AN OPEN VPI AND
VCI NUMBER FOR OPPOSITE
END OF CONNECTION.
NUMBERS WITH NE AND
RATE INDICATED ARE
ALREADY IN USE.
CONFIGURE ENDPOINT
PARAMETERS BY CLICKING
ON BOXES.
RETURNS TO PREVIOUS SCREEN
TO MAKE CORRECTIONS OR
CHANGES. CONTINUES TO NEXT
SCREEN AFTER CONFIGURING
THE CONNECTION ENDPOINTS. CLOSES SCREEN WITHOUT
SAVING CHANGES.
19
FUTURE USE FOR
BILLING INFORMATION.
DISPLAYS SELECTED
DLCI FOR FAR END.
Segment Endpoint
Ingress NDC
Egress NDC
VCI / NE / Rate (Kbps) Service Provider Profile
Remote Interface Identifier:
Remote Connection Identifier:
VPI: VCI: 0 0
Study Indication
DISPLAYS NE AND ATM
PORT
SETS AS SEGMENT ENDPOINT
ENABLES NETWORK DATA
COLLECTION FOR INBOUND
OR OUTBOUND TRAFFIC.
DISPLAYS SELECTED
VCI FOR FAR END.
FAR END LEC
VP OR VC ID.
GENERATES USAGE
INFORMATION FOR
STUDY PURPOSES.
INCREASE OR DECREASE
FRAME SIZE.
Remote Interface Type:
UNI BICI FR UNI
1 / GNE 21 / 1537
2
3
4
5
6
0026-013
Figure 786-5. FR-ATM VC Connection Configuration Window
Cellworx Vision: Connection Configuration
<< Previous
X
Connection Name:
Connection Type: FR-FR
GNE-21 <--> RNE-22
Apply Close
Service Class Type:
GNE-21
<NEW>
FRF.5: DS0-E0 FRS:Slot 14:Port 01: Channels 01-24 DLCI: 18
Ingress Traffic Contract:
FRF.5: DS0-E0 FRS:Slot 14:Port 01: Channels 01-24 DLCI: 22
Ingress Traffic Contract:
<NEW>
DISPLAYS NAME AND TYPE
OF SELECTED CONNECTION.
SELECT A QOS CLASS.
VERIFY INTERFACE AND DLCI
BEING CONFIGURED.
SELECT A TRAFFIC CONTRACT
FROM AVAILABLE LIST OR
SELECT NEW TO CREATE A
NEW TRAFFIC CONTRACT.
VERIFY DESTINATION INTERFACE
AND VPI BEING CONFIGURED.
SELECT A TRAFFIC CONTRACT
FROM AVAILABLE LIST OR
SELECT NEW TO CREATE A
NEW TRAFFIC CONTRACT FOR
DESTINATION NE. SAME TRAFFIC
CONTRACT CAN BE USED FOR
BOTH NEs.
Service Class Type:
RNE-22
SELECT A QOS CLASS.
SELECT APPLY TO CONFIGURE
THE NEW CONNECTION.
NRT-VBR3
fr.304.0.1000
NRT-VBR3
fr.304.0.1000
Refresh
0026-017
Figure 786-6 FR Connection Traffic Management Selection Window