ADC Release 3.1 - Manual (Page 441)

1152700 • Issue 1 • February 2001 • Section 2 Operation and Maintenance
Page 2-421
© 2000, ADC Telecommunications, Inc.
DLP-794
Page 2 of 3
9. To configure the thresholds, place the cursor in the individual count boxes and type in the
new threshold value. Refer to Table 794-1 for valid values. Once all counts are entered in
each box, select the Apply button at the bottom of the screen to send the new data to the
database.
10. Select the Close button to dismiss the open windows.
Stop! You have completed this procedure.
Cellworx Vision: Performance Monitoring Selection Criteria
Save Close
X
Resource:
NE 1: Cellworx1
NE 2: Cellworx2
NE 4: CellworxEXP
Port Layer Interval
current
00:00 - 00:15
00:15 - 00:30
00:30 - 00:45
01:45 - 02:00
01:00 - 01:15
01:30 - 01:45
01:15 - 01:30
00:45 - 01:00
02:00 - 02:15
Apply
Slot / Card Type
Slot 7 / T3 CRS
Slot 10 / Port 1
Slot 10 / Port 2
NE 3: Cellworx3
Slot 10 / T3 CES
Slot 10 / Port 3
AAL-1 Slot 4 / T1 MULTI 1
Slot 5 / RADSL-A CRS
Slot 6 / T3 TMUX MULTI
Slot 12 / 155 MM CRS
Slot 16 / 622 Ring
Slot 17 / 622 Ring
0026-006
Figure 794-1.T3 CES PM Selection Criteria Window
Cellworx Vision: Performance Monitoring Data NE 2
Card Type
Refresh All
X
T3 CES
Slot-Port Interval Suspect SEs LCs BUs BOs SCIs DCs
8-1 current 0 0 0 0 0
Configure Thresholds Close Refresh
AAL-1
0 0
Claear Selected Reset Selected
REFRESHES
SELECTED
LINE. REFRESHES
EVERY LINE
ITEM. RESETS COUNT
OF SELECTED
LINE ITEMS. RESETS COUNT
OF ALL LINE
ITEMS. BRINGS UP
CONFIGURATION
WINDOW FOR
CARD. CLOSES WINDOW.
DISPLAYS CARD
TYPE SELECTED.
DISPLAYS
SELECTED
SLOT AND
PORT.
INTERVAL
SELECTED.
SUSPECTED
RESET
COUNTS
REMAINING COLUMNS DISPLAY ERROR COUNTS FOR
EACH ERROR TYPE.
0026-022
Figure 794-2. Performance Monitoring Data T3 CES Port Window