ADC Release 3.1 User Manual

Page 283

Advertising
background image

1152700

Issue 1

February 2001

Section 2 Operation and Maintenance

Page 2-263

© 2000, ADC Telecommunications, Inc.

DLP-758

Page 1 of 3

SET 155 RING INTERFACE CARD (RIC) CONFIGURATION

Summary: This procedure details the steps required to set the 155 Ring Interface Card
configurations utilizing the Cellworx STN Phase 3.1 shelf level Graphical User Interface (GUI).
User must have the GUI launched and accessed the shelf level GUI display per NTP-006 prior to
performing this procedure.

1. Double click on the 155 RIC located in slot 16 or 17 in the shelf level GUI “Chassis

View”at the top of the window.

2. Set the configuration options for the card and port using Table 758-1 as a reference for

descriptions of the selectable options.

3. Select the Apply button at the bottom of the window to send the new configuration data to

the shelf controller.

Note: Selecting Chassis View will return the user to the previous window without
closing the 155 RIC window. Selecting Refresh will update the current window display
and all the selections last recorded by the Shelf Controller card. Selecting Close will
close this window and return the user to the Chassis View window.

4. Repeat steps 1 through 3 for the second 155 RIC card installed in the shelf.

Stop! You have completed this procedure.

Advertising