ADC Release 3.1 - Manual (Page 434)

1152700 • Issue 1 • February 2001 • Section 2 Operation and Maintenance
Page 2-414
© 2000, ADC Telecommunications, Inc.
DLP-792
Page 2 of 4
Cellworx Vision: Card View - T3 Cell Emulation Service
Status:
Apply Chassis View Refresh
Status
Active
Protect
Timing
Close
X
Configuration:
Card Level
Administrative State: Congestion Thresholds:
Locked
Unlocked
Ingress:
Egress:
80
80
%
%
Port Level
Administrative State: Line Build Out
Locked
Unlocked
Off
On
NE Name: Cellworx1
NE Id: 1
Card: T3 CES
Slot Number: 9
Port Number: 1
Port
ADC
T3
CES
1
2
3
Status
Active
Ring Selection:
Auto Ring 16 Ring 17
Transmit Vendor Circuit ID: default
Line Type: Loopback Config:
M23
C-bit Parity
None
Facility Line
Line Coding: B3ZS
APPLIES CHANGES
AND SENDS TO SHELF
CONTROLLER. RETURNS TO CHASSIS
VIEW WITHOUT CLOSING
CARD LEVEL VIEW. REPAINTS WINDOW
TO REFLECT ANY
CHANGES. CLOSES CARD LEVEL
VIEW AND RETURNS TO
SHELF LEVEL VIEW.
CLICK ON BOX AND DRAG
UP OR DOWN TO WIDEN
STATUS OR CONFIGURATION
VIEWS.
CLICK ON BOX AND DRAG UP
OR DOWN TO WIDEN PORT
LEVEL VIEW.
USE SLIDERS TO VIEW
HIDDEN SELECTIONS.
T3 CES PORT LEVEL
CONFIGURATION OPTIONS.
CARD LEVEL
CONFIGURATION OPTIONS.
NE AND CARD TYPE/
SLOT INFORMATION.
CARD REPRESENTATION
WITH ALARM
INDICATIONS.
CLICK ON THE PORT TO
CONFIGURE INDIVIDUAL
DS3 PORTS.
Terminal
SYNTRAN
Clear Channel
0026-004
Figure 792-1. T3 CES Configuration Screen
Table 792-1. T3 CES Configuration Options
SELECTION DEFAULT OPTIONS DEFINITIONS
Slot Number 2 2 to 15 for Ring NE
2 to 15 for STN-EPS Physical slot locations of the T3 cards in the
shelf.
Admin State
(Card or Port) UNLOCKED LOCKED/
UNLOCKED
Locked = Out of service.
Unlocked = In service.
Congestion
Threshold 80 0 to 100 % Threshold for CLP=1 cells to be discarded on the
ingress/egress path.
Ring Selection Auto Auto
Ring 16
Ring 17
Card will automatically select traffic from the
ring direction with the best signal.
Card will receive traffic from Ring 16 direction.
Card will receive traffic from Ring 17 direction.
Line Build Out Off Off
On Turns on the LBO to compensate for cabling
distance between EIM and customer equipment.
(continued)