ADC Release 3.1 - Manual (Page 400)

1152700 • Issue 1 • February 2001 • Operation and Maintenance
Page 2-380
© 2000, ADC Telecommunications, Inc.
DLP-787
Page 7 of 12
Cellworx Vision: Connection Configuration X
Connection Name:
Connection Type: ATM VP MULTICAST
NE-1 <--> NE-2
Next >> Close
Locked
Unlocked
Administrative State:
Leaf Interfaces:
Root Network Element: NE-1
<< Previous
UNI/NNI: oc3cmm:S-12:P-2:L-atm:I-1
Segment Endpoint Ingress NDC Egress NDC
Service Provider Profile
Remote Interface Identifier:
0
Remote Connection Identifier:
** NE-2 / ds3crs:S-12:P-3:L-atm:I-1
Leaf Network Element: Network Element 2
VPI / NE / Rate(Kbps)
0 Remote Provider Identifier:
VCI VPI 0 0
0
1
2
3
4
5
6
VCC Service
Segment Endpoint Ingress NDC Egress NDC
UNI/NNI: oc3cmm:S-14:P-2:L-atm:I-1
Service Provider Profile
** NE-2 / oc3cmm:S-14:P-2:L-atm:I-1
Page
1
VPI / NE / Rate (Kbps) :
0
1
2 / NE-1/ 64Kbps
3
4
5
Remote Interface Identifier:
VCI VPI 0 0
0
Update
Leaf
Configured Leaf Interfaces:
NE: 2 / ds3crs:S-12:P-3:L-atm:I-1
NE: 2 / oc3cmm:S-14:P-3:L-atm:I-1
NE-2 / oc3cmm:S-15:P-1:L-atm:I-1
TYPE IN A UNIQUE
CONNECTION NAME.
SPECIFIES IF THE CONNECTION
IS A SEGMENT ENDPOINT AND
IF NDC IS DESIRED.
SELECT AN AVAILABLE LEAF
INTERFACE FROM THE LIST.
LEAFS WITH ASTERISKS ARE
ALREADY ASSIGNED.
SELECT A VPI NUMBER
FOR THE ROOT ENDPOINT.
CONNECTION TYPE IS
DISPLAYED HERE.
SPECIFIOES IF THIS LEAF
IS A SEGMENT ENDPOINT AND
IF NDC IS DESIRED.
ENTER LEAF ENDPOINT
SPECIFIC IDENTIFIERS
FOR USAGE INFORMATION
IF DESIRED.
ENTER LEAF ENDPOINT
SPECIFIC IDENTIFIERS
FOR USAGE INFORMATION
IF DESIRED.
CLICK AND DRAG TO
EXPAND VIEWING AREA.
ASSIGN CONTIGUOUS VPI
NUMBERS FOR THE LEAF
ENDPOINT. EACH LEAF
ADDED WILL UTILIZE THE
SAME VPI NUMBERS.
DISPLAYS CONFIGURED
LEAF INTERFACES AFTER
"UPDATE LEAF" HAS BEEN
SELECTED.
RETURNS TO THE PREVIOUS
CONNECTION CONFIGURATION
SCREEN. CONTINUES TO THE NEXT
CONNECTION CONFIGURATION
SCREEN AFTER ALL DATA HAS
BEEN ENTERED AND LEAFS HAVE
BEEN UPDATED. CLOSES THE SCREEN AND
ABORTS THE CONNECTION
CONFIGURATION.
UPDATES THE LEAF
INFORMATION AFTER ALL
DATA HAS BEEN ENTERED.
LEAF INTERFACE WILL
INDICATE IT IS ASSIGNED
VIA DOUBNLE ASTERISKS.
LOCKS OR UNLOCKS
ROOT END OF THE
CONNECTION.
14457-A
Figure 787-4. ATM VP Multicasting Configuration Window – Leaf Assignments
Table 787-1. VP Multicast Connection Configuration Options
SELECTION OPTIONS DESCRIPTION
Segment Endpoint Single selection box Sets end of connection as a segment endpoint for OAM cells.
Ingress / Egress
NDC On or Off Enables or disables the network data collection for endpoint.
VPI/NE/Rate User Selectable The VPI available is determined by the card interface
configuration. VPI with asterisks before them are already
utilized and not selectable.
Remote Provider
Identifier User Defined Enter alphanumeric data to help identify the far end provider
interface.
Remote Interface
Identifier VPI
VCI Enter the VPI and VCI numbers to identify the remote
provider circuit. This data may be utilized for usage
information.
Leaf Interface User Selectable This list displays the configured leaf endpoints selected from
the previous configuration window. Ids with asterisks before
them are already utilized and not selectable.