ADC Release 3.1 - Manual (Page 421)

1152700 • Issue 1 • February 2001 • Operation and Maintenance
Page 2-401
© 2000, ADC Telecommunications, Inc.
DLP-790
Page 10 of 14
Table 790-1. Sub-network Connection Configuration Options
SELECTION OPTIONS DESCRIPTION
VCI User Defined Virtual Connection Identifier numbers defined during card
interface configuration. Refer to NTP_009 for card
configuration procedures if needed.
Segment Endpoint Single selection
box Sets this end of the connection as a segment endpoint for
OAM cells.
Ingress / Egress
NDC On or Off Enables or disables the network data collection for selected
circuit.
Remote Provider
Identifier User Defined Enter alphanumeric data to help identify the far end provider
interface.
Remote Interface
Identifier VPI
VCI Enter the VPI and VCI numbers to identify the remote
provider circuit. This data may be utilized for usage
information.
Study Indication On or Off Generates usage information for study purposes.
Remote Interface
Type UNI
B-ICI User to Network Interface
Broadband- Inter-Exchange Carrier Interface
Leaf Interface User Selectable This list displays the configured leaf endpoints selected from
the previous configuration window. Ids with asterisks before
them are already utilized and not selectable.
Cellworx Vision: Connection Configuration X
Connection Name:
Connection Type: ATM BUNDLED VC MULTICAST
NE-1 <--> NE-2
Locked
Unlocked
Administrative State:
Root Network Element: NE-1
<< Previous
UNI/NNI: oc3cmm:S-14:P-2:L-atm:I-1 VPI: 2 VCI:
Service Class Type: CBR
Root VCs: Ingress Traffic Contracts: Configured Root VCs:
Update
Root
Reset
Root
oc3cmm:S-14:P-2:L-atm:I-1/ VPI: 2 VCI: 34
oc3cmm:S-14:P-2:L-atm:I-1/ VPI: 2 VCI: 35
oc3cmm:S-14:P-2:L-atm:I-1/ VPI: 2 VCI: 36 <NEW>
cbr-15
Apply Close Refresh
DISPLAYS CONNECTION NAME.
DISPLAYS PREVIOUSLY SELECTED
CONNECTION TYPE.
DISPLAYS ROOT NE AND INTERFACE
IDENTIFICATIO.N
SELECT THE SERVICE CLASS
DESIRED FROM DROP DOWN
LIST. WILL DISPLAY LIKE
CONTRACTS IN THE INGRESS
TRAFFIC CONTRACT BOX.
cbr-1.5 MB
cbr-100 kB
cbr- 44 MB
: 1 VCI: 33 / CBR=100kB
: 1 VCI: 34 / CBR=100kB
: 1 VCI: 35 / CBR=100kB
DISPLAYS LIST OF ROOT VCs
AVAILABLE. HIGHLIGHT VC THEN
SELECT INGRESS TRAFFIC
CONTRACT. SELECT <NEW> IF
CREATING A NEW CONTRACT
AND THEN APPLY.
APPLYS TRAFFIC CONTRACT
TO SELECTED ROOT VC AFTER
UPDATE ROOT HAS BEEN
SELECTED, OR CONTINUES TO
CREATE A TRAFFIC CONTRACT
WINDOW IF <NEW> WAS SELECTED. REFRESHES WINDOW
AND DISPLAYS NEW
CONFIGURATION
CHANGES. RETURNS TO PREVIOUS
CONFIGURATION WINDOW. CLOSES TRAFFIC CONTRACT
WINDOW WITHOUT SAVING
CHANGES.
BOX DISPLAYS ROOT VCs
THAT HAVE BEEN UPDATED
WITH A TRAFFIC CONTRACT.
SELECT TO ADD HIGHLIGHTED
ROOT VC TO THE CONFIGURED
ROOT VCs BOX.
SELECT AFTER HIGHLIGHTING
CONFIGURED ROOT VC TO
SELECT A NEW TRAFFIC
CONTRACT. ROOT WIL BE
REMOVED FROM CONFIGURED
ROOT VC BOX UNTIL A NEW
CONTRACT HAS BEEN SELECTED
AND UPDATED.
LOCKS ROOT END OF
CONNECTION ONLY.
14462-A
Figure 790-7. ATM VC Bundled Multicasting Traffic Contract