ADC Release 3.1 - Manual (Page 225)

1152700 • Issue 1 • February 2001 • Section 2 Operation and Maintenance
Page 2-205

2000, ADC Telecommunications, Inc.
DLP-740
Page 3 of 5
Cellworx Vision: Remove Ring NE - Task Overview X
2) Physically remove transmit fiber from left RIC
1) Checking for exisiting connections
3) Physically remove receive fiber from left RIC
4) Connect network elements left RICs
5) Physically remove transmit fiber from right RIC
6) Physically remove receive fiber from right RIC
7) Connect new network element to right RICs
8) Discovering network configuration
9) NE removed updating topology
11752-C
Figure 740-2. Cellworx Vision Remove Ring NE Task Overview
Cellworx Vision: Remove Ring NE - Disconnect Fiber
Physically disconnect the transmit fiber from the
left Ring Interface Card on network element
X
Cancel Next>>
Network Element 1 (id 1)
11920-B
Figure 740-3. Cellworx Vision Remove Ring NE Fiber Instructional Window
Cellworx Vision : Remove Ring NE - Connect Fiber X
Cancel Next>>
Connect the physical fiber to the transmit port of
the left Ring Interface Card on network element
and the receive port of the left Ring Interface Card
on the new network element.
Network Element 1 (id 1)
Network Element 3 (id 3)
11753-B
Figure 740-4. Cellworx Vision Connect Ring NE Fibers Instructional Window