ADC Release 3.1 - Manual (Page 428)

1152700 • Issue 1 • February 2001 • Operation and Maintenance
Page 2-408
© 2000, ADC Telecommunications, Inc.
DLP-791
Page 3 of 7
12. Set the leaf endpoint parameters as needed. The VCI numbers are not configurable as all
leaf endpoints share the same VCI ids. Refer to Table 791-2 for configurable endpoint
options. Select the Apply button once all parameters are entered.
13. The system responds “Successfully Added Leaf to Connection”. Click on OK to finish.
14. Click on Close to close the Add Leaf window and return to the Connection Configuration
window.
15. Repeat steps 11 though 14 for any other leaves that need to be added.
Stop! You have completed this procedure.
Cellworx Vision Subnetwork Management System
File Configuration Fault Performance
Software
NMIC Platform
Topology
Time and Date
Create...
View Fiber Bandwidth Usage ...
View Ring Resource Usage ...
Configure Service Provider Profile ...
Configure Traffic Contract ...
View ...
Connection
10963-D
Figure 791-1. GUI Connection Menu Tree