ADC Release 3.1 - Manual (Page 460)

1152700 • Issue 1 • February 2001 • Section 2 Operation and Maintenance
Page 2-440
© 2000, ADC Telecommunications, Inc.
DLP-797
Page 4of 4
Table 797-2. ATM Interface Configuration Options, continued
SELECTION DEFAULT OPTIONS DEFINITIONS
Recording Interface
ID All 0s Numeric Identifies the site card and port location for
customer billing capabilities, (allows
assignment of a customer ID for each port.)
The code is limited to 15 numeric characters.
UNI/ NNI Select UNI UNI
NNI Specifies interface type as User to Network
Interface or Network to Network Interface.
CAC Formula PCR PCR
SCR Specifies Peak Cell Rate or Sustained Cell Rate
for Connection Admission Control calculations.
Traffic Policing Enable Enable
Disable User sets whether traffic will be policed for
Quality Of Service (QOS).
Cell Scrambling True True or False User sets whether traffic will be scrambled.
Subscription Rate 100 PCR: 100 to 1000
SCR: 1 to 100 User sets depending on traffic contract.
Max Active
VPI/VCI Bits 0 0 to 12 Sets maximum number of bits allowed to select
virtual channel from.
Max number of
VPCs 4096 0-4096 Sets maximum number of virtual path circuits
that may be assigned on this port.
Max number of
VCCs 0 0-8192 Sets maximum number of virtual channel
circuits that may be assigned on this port.
Figure 797-2. 622 SM CRS ATM Port Interface Configuration Screen