ADC Release 3.1 - Manual (Page 258)

1152700 • Issue 1 • February 2001 • Section 2 Operation and Maintenance
Page 2-238
© 2000, ADC Telecommunications, Inc.
DLP-752
Page 2 of 4
10. Repeat steps 1 through 9 for each 155 SM/MM CRS card installed in the shelf.
Stop! You have completed this procedure.
Cellworx Vision: Card View - 155 Cell Relay Service Single Mode
Status:
Apply Chassis View Refresh
Status
Active
Protect
Timing
Close
X
Configuration:
Card Level
Administrative State: Congestion Thresholds:
Locked
Unlocked
Ingress:
Egress:
80
80
%
%
Port Level
Administrative State: Transmit Timing Source:
Locked
Unlocked
System
Recieved
NE Name: Cellworx1
NE Id: 1
Card: 155 SM CRS
Slot Number: 9
Port Number: 1
Port
ADC
155 SM
CRS
1
2
Status
Active
APS
Timing
Expansion Shelf Interface
Timing Port:
Port 1
Port 2
Do not use for synchronization
SONET
Medium Type:
SDH
Loopback towards:
None Terminal Facility
Diagnostics
APPLIES CHANGES
AND SENDS TO SHELF
CONTROLLER. RETURNS TO CHASSIS
VIEW WITHOUT CLOSING
CARD LEVEL VIEW. REPAINTS WINDOW
TO REFLECT ANY
CHANGES. CLOSES CARD LEVEL
VIEW AND RETURNS TO
SHELF LEVEL VIEW. PERFORMS TEST
OVER FIBER
LINK.
CLICK ON BOX AND DRAG
UP OR DOWN TO WIDEN
STATUS OR CONFIGURATION
VIEWS.
CLICK ON BOX AND DRAG UP
OR DOWN TO WIDEN PORT
LEVEL VIEW.
USE SLIDERS TO VIEW
HIDDEN SELECTIONS.
155 MBPS PORT LEVEL
CONFIGURATION OPTIONS.
CARD LEVEL
CONFIGURATION OPTIONS.
NE AND CARD TYPE/
SLOT INFORMATION.
CARD REPRESENTATION
WITH REAL TIME ALARM
INDICATIONS.
13452-B
Auto Ring 16 Ring 17
Enable Signal Degrade
Signal Degrade BER Threshold: 10E- 5
Figure 752-1. 155 SM CRS Card Shelf Level GUI Configuration Screen
Table 752-1. 155 SM/MM CRS Card Configuration Options
SELECTION DEFAULT OPTIONS DEFINITIONS
Admin State Unlock Lock / Unlock Enable or disable card / port for service.
Congestion Threshold 80 0-100 Percentage of ingress buffer capacity that will cause
a congestion threshold notification.
Ring Selection Auto Auto
Ring 16
Ring 17
Card will automatically select traffic from the ring
direction with the best signal.
Card will receive traffic from Ring 16 direction.
Card will receive traffic from Ring 17 direction.
Timing Port Selection 1 1 or 2 Selects the port to use as a reference when this slot
is selected as the shelf timing source.
Shelf Expansion
Interface Selected Selected
Not selected
Determines if the 155 SM/MM CRS card is being
used as an expansion shelf interface (SEPIC) in an
EPS or RNE. Click on the box to select it.
(continued)