ADC Release 3.1 - Manual (Page 373)

1152700 • Issue 1 • February 2001 • Operation and Maintenance
Page 2-353
© 2000, ADC Telecommunications, Inc.
DLP-784
Page 4 of 7
Smoothing Constant: 0.3
Ingress:
Low Buffer Congestion Threshold:
High Buffer Congestion Threshold:
Abatement
0
40
100
Onset
Abatement
0
65
100
Onset
CLICK ON THE UP OR DOWN ARROWS TO INCREASE OR DECREASE THE
VALUE WHICH PROVIDES EXPONENTIAL SMOOTHING FOR ALARM NOTICES
THAT REPORT/RESPOND TO FR BUFFER CONGESTION
SELECT THE BLACK BLOCK AND DRAG
TO THE DESIRED BUFFER CONGESTION
THRESHOLD FOR ALARM ABATEMENT.
THIS VALUE WILL BE 10 PERCENT LESS
THAN THE THRESHOLD ONSET. SELECT THE RED BLOCK AND DRAG
TO THE DESIRED BUFFER CONGESTION
THRESHOLD FOR ALARM ONSET. ANY
CELLS TAGGED AS DISCARD ELIGIBLE
FOR ANY INTERFACE AND PORT MAY BE
DISCARDED ONCE THIS THRESHOLD IS
CROSSED.
0026-001
Figure 784-2. FRS Buffer Congestion Threshold Settings
Ports 1 and 2 Channelized; Ports 5 and 6 disabled
Ports 1, 2, 5, and 6 Fractional
Ports 3 and 4 Channelized; Ports 7 and 8 disabled
Ports 3, 4, 7, and 8 Fractional
Port Mode:
SELECT THE DESIRED PORT CONFIGURATION AND THEN
HIT THE APPLY BUTTON. NOTE THAT IF SELECTING
CHANNELIZED CONFIGURATION, PORTS 5 AND 6, AND/OR
7 AND 8 WILL NOT BE SELECTABLE FOR INTERFACE
CONFIGURATION.
0026-021
Figure 784-3. FRS Port Mode Settings