ADC Release 3.1 - Manual (Page 458)

1152700 • Issue 1 • February 2001 • Section 2 Operation and Maintenance
Page 2-438
© 2000, ADC Telecommunications, Inc.
DLP-797
Page 2 of 4
10. Repeat steps 1 through 9 for each 622 SM CRS card installed in the shelf.
Stop! You have completed this procedure.
Figure 797-1. 622 SM CRS Card Shelf Level GUI Configuration Screen
Table 797-1. 622 SM CRS Card Configuration Options
SELECTION DEFAULT OPTIONS DEFINITIONS
Admin State Unlock Lock / Unlock Enable or disable card / port for service.
Congestion Threshold 80 0-100 Percentage of ingress buffer capacity that will cause
a congestion threshold notification.
Ring Selection Auto Auto
Ring 16
Ring 17
Card will automatically select traffic from the ring
direction with the best signal.
Card will receive traffic from Ring 16 direction.
Card will receive traffic from Ring 17 direction.
Timing Port Selection 1 1 or 2 Selects the port to use as a reference when this slot
is selected as the shelf timing source.
Shelf Expansion
Interface Selected Selected
Not selected
Determines if the 622 SM CRS card is being used as
an expansion shelf interface (SEPIC) in an EPS or
RNE. Click on the box to select it.
(continued)