Allied Telesis AT-S63 - Manual (Page 113)

AT-S63 Management Software Command Line User’s Guide
Section I: Basic Operations 113
PURGE SWITCH PORT
Syntax
purge switch port= port
Parameters
port Specifies the port whose parameter settings are to be
returned to the default values. You can specify more
than one port at a time. You can specify the ports
individually (for example, 5,7,22), as a range (for
example, 18-23), or both (for example, 1,5,14-22).
Description
This command returns all of the parameter settings of a port to the factory
default values. To reset a port and retain its settings, use “RESET
SWITCH PORT” on page 114.
Example
The following example resets the settings for port 10 to the factory default
values:
purge switch port=10