Allied Telesis AT-S63 User Manual
Page 269
Advertising
AT-S63 Management Software Command Line User’s Guide
Section II: Advanced Operations
269
Description
This command modifies an ACL. You can use the command to change the
description, action, classifiers, and ports of an ACL.
Examples
This command changes the description of ACL ID 4:
set acl=4 description=”ARP flow”
This command changes the action of ACL ID 6 to permit and reassigns it
to ports 4 to 7:
set acl=6 action=permit portlist=4-7
This command changes the classifiers of ACL ID 41:
set acl=41 classifierlist=22,24,36
Advertising