Allied Telesis AT-S63 - Manual (Page 149)

AT-S63 Management Software Command Line User’s Guide
Section I: Basic Operations 149
The columns are defined here:
ˆ MAC Address - The static or dynamic unicast MAC address.
ˆ VLAN ID - The ID number of the VLAN where the port is an untagged
member.
ˆ Type - The type of the address: static or dynamic.
ˆ Port Maps - The tagged and untagged ports on the switch that are
members of a multicast group. This column is useful in determining
which ports belong to different groups.
Examples
The following command displays all the static and dynamic unicast MAC
addresses in the switch’s MAC address table:
show switch fdb
The following command displays just the static unicast MAC addresses:
show switch fdb type=static
The following command displays the static and dynamic multicast
addresses:
show switch fdb type=multicast
The following command displays just the static multicast addresses:
show switch fdb type=staticmulticast
The following command displays the port where the MAC address
00:A0:D2:18:1A:11 was learned (dynamic) or added (static):
show switch fdb address=00A0D2181A11
The following command displays the MAC addresses learned on port 2:
show switch fdb port=2
The following command displays the MAC addresses learned on the ports
in the Sales VLAN:
show switch fdb vlan=sales
The following command displays the static MAC addresses on port 17:
show switch fdb port=17 type=static