Allied Telesis AT-S63 - Manual (Page 344)

Chapter 20: Power Over Ethernet Commands
344 Section II: Advanced Operations
DISABLE POE PORT
Syntax
disable poe port= port
Parameters
port Specifies a port. You can configure more than one port
at a time. The ports can be specified individually (for
example, 5,7,22), as a range (for example, 18-23), or
both (for example, 1,5,14-22).
Description
This command disables PoE on a port. The default setting for PoE on a
port is enabled. Ports provide standard Ethernet connectivity even when
PoE is disabled.
Examples
This command disables PoE on ports 5 and 7:
disable poe port=5,7