Allied Telesis AT-S63 - Manual (Page 527)

AT-S63 Management Software Command Line User’s Guide
Section VI: Virtual LANs 527
SHOW GARP COUNTER
Syntax
show garp=gvrp counter
Parameter
garp Specifies the GARP application to be displayed.
GVRP is the only GARP application supported by the
AT-9400 Switch.
Note
The online help for this command contains an STP option. This
option is not supported.
Description
This command displays the current values for the following GARP packet
and message counters:
ˆ GARP application
ˆ Receive: Total GARP Packets
ˆ Transmit: Total GARP Packets
ˆ Receive: Invalid GARP Packets
ˆ Receive Discarded: GARP Disabled
ˆ Receive DIscarded: Port Not Listening
ˆ Transmit Discarded: Port Not Sending
ˆ Receive Discarded: Invalid Port
ˆ Receive Discarded: Invalid Protocol
ˆ Receive Discarded: Invalid Format
ˆ Receive Discarded: Database Full
ˆ Receive GARP Messages: LeaveAll
ˆ Transmit GARP Messages: LeaveAll
ˆ Receive GARP Messages: JoinEmpty
ˆ Transmit GARP Messages: JoinEmpty
ˆ Receive GARP Messages: JoinIn
ˆ Transmit GARP Messages: JoinIn
ˆ Receive GARP Messages: LeaveEmpty
ˆ Transmit GARP Messages: LeaveEmpty