Enable mldsnooping – Allied Telesis AT-S63 User Manual
Page 369
Advertising
AT-S63 Management Software Command Line User’s Guide
Section III: Snooping Protocols
369
ENABLE MLDSNOOPING
Syntax
enable mldsnooping
Parameters
None.
Description
This command activates MLD snooping on the switch.
Example
The following command activates MLD snooping:
enable mldsnooping
Equivalent Command
set ipv6 mldsnooping snoopingstatus=enabled
For information, refer to “SET IPV6 MLDSNOOPING” on page 370.
Advertising