Show garp gip – Allied Telesis AT-S63 User Manual
Page 530
Advertising
Chapter 30: GARP VLAN Registration Protocol Commands
530
Section VI: Virtual LANs
SHOW GARP GIP
Syntax
show garp=gvrp gip
Parameter
garp
Specifies the GARP application to be displayed.
GVRP is the only GARP application supported by the
AT-9400 Switch.
Note
The online help for this command contains an STP option. This
option is not supported.
Description
This command displays the following parameters for the GIP-connected
ring for the GARP application:
GARP Application
GIP contact
STP ID
Example
The following command displays the GIP-connected ring for all GARP
applications:
show garp=gvrp gip
Advertising