Set date – Allied Telesis AT-S63 User Manual
Page 79
Advertising
AT-S63 Management Software Command Line User’s Guide
Section I: Basic Operations
79
SET DATE
Syntax
set date=
dd-mm-yyyy
Parameter
date
Specifies the date for the switch in day-month-year
format.
Description
This command sets the date on the switch. You can use this command to
set the switch’s date if you are not using an SNTP server. With its onboard
battery, the AT-9400 Switch can maintain the date even when the unit is
powered off or reset.
Example
The following command sets the switch’s date to December 11, 2004:
set date=11-12-2004
Advertising