Show snmpv3 view – Allied Telesis AT-S63 User Manual
Page 443
Advertising
AT-S63 Management Software Command Line User’s Guide
Section IV: SNMPv3
443
SHOW SNMPV3 VIEW
Syntax
show snmpv3 view=
view
[subtree=OID|text]
Parameter
view
Specifies an SNMPv3 View Table entry.
subtree
Specifies the view subtree view. Options are:
OID
A numeric value in hexadecimal format.
text
Text name of the view.
Description
This command displays the SNMPv3 View Table entries. You can display
one or all of the table entries.
Examples
The following command displays the SNMPv3 View Table entry called
“snmpv3manager95”:
show snmpv3 targetparams=snmpv3manager95
The following command displays all the SNMPv3 View Table entries:
show snmpv3 targetparams
Advertising