Allied Telesis AT-S63 - Manual (Page 365)

AT-S63 Management Software Command Line User’s Guide
Section III: Snooping Protocols 365
Examples
The following command displays the current IGMP parameter settings:
show ip igmp
The following command displays a list of active host nodes connected to
the switch:
show ip igmp hostlist
The following command displays a list of active multicast routers:
show ip igmp routerlist
Equivalent Command
show igmpsnooping
This command does not display the router and host lists. For information,
see “SHOW IGMPSNOOPING” on page 361.