Enable poe port – Allied Telesis AT-S63 User Manual
Page 345
Advertising
AT-S63 Management Software Command Line User’s Guide
Section II: Advanced Operations
345
ENABLE POE PORT
Syntax
enable poe port=
port
Parameters
port
Specifies a port. You can configure more than one port
at a time. The ports can be specified individually (for
example, 5,7,22), as a range (for example, 18-23), or
both (for example, 1,5,14-22).
Description
This command activates PoE on the ports. The default setting for PoE is
enabled.
Examples
This commands activates PoE on port 2:
enable poe port=2
Advertising