Set password manager – Allied Telesis AT-S63 User Manual
Page 49
Advertising
AT-S63 Management Software Command Line User’s Guide
Section I: Basic Operations
49
SET PASSWORD MANAGER
Syntax
set password manager
Parameters
None.
Description
This command sets the manager’s password. The manager account
allows you to view and change all switch parameters. The default
password is “friend.” The password can be from 0 to 16 alphanumeric
characters. Allied Telesis recommends that you avoid special characters,
such as spaces, asterisks, or exclamation points because some web
browsers do not accept them in passwords. The password is case
sensitive.
Example
The following command changes the manager’s password:
set password manager
Follow the prompts to enter the new password.
Equivalent Command
set user manager password=
password
Advertising