Allied Telesis AT-S63 - Manual (Page 676)

Chapter 39: Encryption Key Commands
676 Section IX: Management Security
SHOW ENCO
Syntax
show enco key=[ key-id ]
Parameters
key Specifies the ID of a specific key whose information
you want to display. Otherwise, all keys are displayed.
Description
This command displays information about encryption key pairs stored in
the key database. This command displays the following information about
each key:
ˆ ID
ˆ Algorithm
ˆ Length Digest
ˆ Description
Example
The following command displays the information on encryption key 1:
show enco key=1