Allied Telesis AT-S63 - Manual (Page 555)

555
Chapter 33
Internet Protocol Version 4 Packet
Routing Commands
This chapter has the following commands:
ˆ “ADD IP ARP” on page 556
ˆ “ADD IP INTERFACE” on page 558
ˆ “ADD IP RIP” on page 560
ˆ “ADD IP ROUTE” on page 563
ˆ “DELETE IP ARP” on page 565
ˆ “DELETE IP INTERFACE” on page 566
ˆ “DELETE IP RIP” on page 567
ˆ “DELETE IP ROUTE” on page 568
ˆ “DISABLE IP ROUTE MULTIPATH” on page 569
ˆ “ENABLE IP ROUTE MULTIPATH” on page 570
ˆ “PURGE IP” on page 571
ˆ “SET IP ARP” on page 572
ˆ “SET IP ARP TIMEOUT” on page 573
ˆ “SET IP INTERFACE” on page 574
ˆ “SET IP LOCAL INTERFACE” on page 576
ˆ “SET IP RIP” on page 577
ˆ “SET IP ROUTE” on page 580
ˆ “SHOW IP ARP” on page 582
ˆ “SHOW IP COUNTER” on page 584
ˆ “SHOW IP INTERFACE” on page 586
ˆ “SHOW IP RIP COUNTER” on page 588
ˆ “SHOW IP RIP INTERFACE” on page 590
ˆ “SHOW IP ROUTE” on page 592
Note
Remember to save your changes with the SAVE CONFIGURATION
command.