Allied Telesis AT-S63 - Manual (Page 519)

519
Chapter 30
GARP VLAN Registration Protocol
Commands
This chapter contains the following commands:
ˆ “DISABLE GARP” on page 520
ˆ “ENABLE GARP” on page 521
ˆ “PURGE GARP” on page 522
ˆ “SET GARP PORT” on page 523
ˆ “SET GARP TIMER” on page 524
ˆ “SHOW GARP” on page 526
ˆ “SHOW GARP COUNTER” on page 527
ˆ “SHOW GARP DATABASE” on page 529
ˆ “SHOW GARP GIP” on page 530
ˆ “SHOW GARP MACHINE” on page 531
Note
Remember to save your changes with the SAVE CONFIGURATION
command.