Allied Telesis AT-S63 - Manual (Page 351)

AT-S63 Management Software Command Line User’s Guide
Section II: Advanced Operations 351
means the device is not a powered device or PoE has been disabled
on the port.
ˆ Power Consumed - The amount of power in milliwatts currently
consumed by the powered device connected to the port. If the port is
not connected to a powered device, this value will be 0 (zero).
ˆ Power Limit - The maximum amount of power allowed by the port for
the device. The default is 15,400 milliwatts (15.4 W). To adjust this
value for a port, refer to “SET POE PORT” on page 346.
ˆ Power Priority - The port priority. This can be Critical, High, or Low. To
adjust this value, refer to “SET POE PORT” on page 346.
ˆ Power Class - The IEEE 802.3af class of the device.
ˆ Voltage - The voltage being provided to the powered device
ˆ Current - The current drawn by the powered device.
Examples
This command displays general PoE information:
show poe status
This command displays PoE information for port 4:
show poe status port=4