Allied Telesis AT-S63 - Manual (Page 360)

Chapter 21: IGMP Snooping Commands
360 Section III: Snooping Protocols
Examples
The following command activates IGMP snooping, sets the IGMP topology
to Multi-Host, and sets the timeout value to 120 seconds:
set ip igmp snoopingstatus=enabled hoststatus=multihost
timeout=120
The following command changes the topology to Single-Host:
set ip igmp hoststatus=singlehost
The following command disables IGMP snooping:
set ip igmp snoopingstatus=disabled
Equivalent Commands
disable igmpsnooping
For information, refer to “DISABLE IGMPSNOOPING” on page 356.
enable igmpsnooping
For information, refer to “ENABLE IGMPSNOOPING” on page 357.